PENINGKATAN KETAHANAN KOROSI PADA PERMUKAAN Cu40Zn DENGAN PROSES SHOT PEENING VARIASI TEKANAN TEMBAK
Abstract
Keywords
Full Text:
PDFReferences
ASTM G5-94, (1999), Standard Reference Test Method for Making Potentiostatic and
Potentiodynamic Anodic Polarization Measurement, 1999.
Febriyanti, E., Priadi, D., Riastuti, R., (2015), Pengaruh Thermomechanical Controlled
Processed (TMCP) terhadap penghalusan butir dan sifat mekanik paduan Cu-Zn
/30, Metalurgi (2015) 3. LIPI, Jakarta pp. 141-148.
http://mgduff.co.uk/cathodic-protection
H. Ma, S.Chen, L. Niu, S. Zhao, S.Li, D. Li., (2002), Inhibition of Copper Corrosion by
Several Shifts Bases in Aerated Halide Solution, J. Appl. Electrochem, Vo. 32, pp. 65-
Iswanto, P.T., Malau, V., Priyambodo, B.H., Wibowo, T.N., Amin, N., (2017), Effect of
Shot-Peening on Hardness and Pitting Corrosion Rate on Load-Bearing Implant
Material AISI 304, Materials Science Forum, Vol. 901.
Jones, D.A., 1991, Principles and Prevention of Corrosion, Mc Milman Publishing
Company, New York.
Joseph Raj Xavier, Rajendran Nallaiyan, S. Nanjundan., ( 2012), Electrochemical
Absorption Propeties and Inhibition of Brass Corrosion in Natural Seawater by
Thiadiazole Derivatives : Exprimental and Theorical Investigation, Industry
Engineering Chemistry, Vol. 51 pp. 30-42.
Majanasastra, S.B.R., (2016), Analisis sifat mekanik dan struktur mikro hasil proses
hydroforming pada material tembaga (Cu) C84800 dan aluminium (Al) 6063, Jurnal
ilmiah teknik mesin, Vol. 4 No. 2, Universitas Islam 45 Bekasi.
Mehmet, Y.H., Metin Bedir, Abdulcabbar Y., (2016), Structural and corrosion study of
uncoated and Zn-Cu coated Magnesium-Based alloy, Metal 6, 322
doi:10.3390/met6120322.
Priyambodo, B.H dan Yaqin, R. I., (2018), Studi Durasi Electroplating Ni-Cr pada AISI
L terhadap Laju Korosi dalam Media 3,5% NaCl, Konferensi Ilmiah Teknologi
Texmaco 1, pp. 99-103.
Qining Song, Nan Xu, Ye Feng Bao, Yong Feng Jiang, Wei Gu, Yu Gui Zheng, Yan Xin
Qiao, (2017), Corrosion and cavitation erosion behaviors of two marine propeller
materials in clean and sulfide polluted 3,5% NaCl solutions, Acta Metall. Sin, 30(8),
doi:10.1007/s40195-017-0602-7, pp. 712-720,
Refaey, S.A.M., Abd El Malak. A.M., Abdel Fatah, H.T.M., Taha, F., (2007), Corrosion and
inhibition of Cu-Zn alloys in NaCl solution by using permanganate and phosphate
anions, Int. J. Electrochem. Sci, 2 pp. 563-571.
Slamet, S.,(2016), The effect of Cu concentration on unidirectional solidification process for
micro structure of Al-Cu Alloy, ISSN: 1979-6870, thesis, Universitas Gadjah Mada.
Slamet, S., Suyitno, (2017), Pengaruh komposisi dan temperatur tuang terhadap fluiditas
paduan perunggu timah melalui investment casting, Prosiding SNATIF ke-4, ISBN:
-602=1180-50-1, Universitas Muria Kudus.
Taufikurahman, Safei, Hardianto I., (2005), Analisa sifat mekanik bahan paduan tembagaseng sebagai alternatif pengganti bantalan gelinding pada lori pengangkut buah
sawit, Jurnal teknik mesin Vol.7 No. 2, Univesitas Petra Surabaya, pp. 77-84.
Wibowo, T.N., Iswanto, P.T., Priyambodo, B.H., Amin, N., (2016), Pengaruh Variasi
Waktu Shot Peening terhadap Struktur Mikro dan Kekerasan Permukaan Pada
Material Implan Aisi 304, Jurnal Rotor, pp. 70-73.
Yaqin, R. I., Iswanto, P. T., Priyambodo, B.H., Kondi Maliwemu, E. U. (2017). Pengaruh
durasi shot peening terhadap struktur mikro dan kekerasan permukaan pada AISI
L, Seminar Nasional Teknologi Informasi dan Kedirgantaraan (SENATIK), III, 0–
https://doi.org/http://dx.doi.org/10.28989/senatik.v3i0.120
Refbacks
- There are currently no refbacks.